Hey Leute!
Gleich mal vorweg: Bin ein absoluter Linux neuling....
Ich habe einen ASUS 901 mit eeeUbuntu
Ich habe mir beim hofer das internetpaket von yesss gekauft mit dem MF628er modem
Nach dem ich auf dieses forum hier gestoßen bin habe ich alles so gemacht, wie HIER beschrieben.
Anschließend habe ich UMTSMON 0.8 installiert.
doch wenn ich Umtsmon starte bekomm ich folgende fehlermeldung:
1] pppd
|--------- /usr/sbin/pppd -------- Required if you want to make connections
4] icon switch
|-------- !!! missing binary -------- Only required for the "option ICON" USB Box
anschließend öffnet sich das Umtsmon fenster.!
wenn ich mich nun einwählen will bekomme ich neuerlich eine fehlermeldung:
Failed to start PPP
please Re-Run Umtsmon from the commandline with -v5 and check output
und das kommt dabei raus:
ratman@RatMan-eee-pc:~$ umtsmon -v5
umtsmon version 0.8 .
##P1 t=678: setVerbosity: '5'
##P2 t=678: set verbosity level to 5
##P2 t=678: set PPP verbosity level to 2
installing text SIGABRT handler
##P5 t=678: loadTranslator('qt', '(null)')
##P1 t=678: aLocale '(null)' denied
##P5 t=678: loadTranslator('qt', 'de_AT.UTF-8')
##P5 t=678: Translation filename: 'qt_de_AT.UTF-8'
##P5 t=678: ... NOT FOUND
##P5 t=678: loadTranslator('umtsmon', 'de_AT.UTF-8')
##P5 t=678: Translation filename: 'umtsmon_de_AT.UTF-8'
##P5 t=678: .. found in system translations
##P2 t=678: Installing Translator files for locale 'de_AT.UTF-8'
##P5 t=678: TheDeviceManagerSingleton::TheDeviceManagerSingleton()
##P5 t=678: Runner::findBinaries()
##P5 t=678: lookThroughPath(pccardctl)
##P5 t=678: * found /sbin/pccardctl
##P5 t=678: lookThroughPath(pppd)
##P5 t=678: * found /usr/sbin/pppd
##P5 t=678: lookThroughPath(chat)
##P5 t=678: * found /usr/sbin/chat
##P5 t=678: lookThroughPath(kdesu)
##P5 t=678: * ignoring entry '/sbin' as it's not in /opt/* or /usr/*
##P5 t=678: * ignoring entry '/bin' as it's not in /opt/* or /usr/*
##P5 t=678: *** searching kdesu really failed :-(
##P5 t=678: lookThroughPath(gnomesu)
##P5 t=678: * ignoring entry '/sbin' as it's not in /opt/* or /usr/*
##P5 t=678: * ignoring entry '/bin' as it's not in /opt/* or /usr/*
##P5 t=678: *** searching gnomesu really failed :-(
##P5 t=678: lookThroughPath(gksu)
##P5 t=678: * found /usr/bin/gksu
##P2 t=678: ./icon_switch does not exist
##P5 t=678: Runner::findBinaries() completed successfully
##P3 t=678: TheDeviceManagerSingleton::setupDevice(void)
##P3 t=678: TheDeviceManagerSingleton::readFromConfigFile()
##P5 t=678: TheSettingsSingleton::TheSettingsSingleton()
##P2 t=678: Settings will be saved in : '/home/ratman/.umtsmon'
##P4 t=678: read PPP port from config: '/dev/ttyUSB1'.
##P4 t=678: read AT port from config: '/dev/ttyUSB3'.
##P4 t=678: read device type from config: 0x5E21A700
##P3 t=678: Complete config read from file - good :-)
##P3 t=678: Start iterating through all AutoDetectors
##P4 t=678: Kernel: 'Linux version 2.6.24-21-eeepc (root@adamm-laptop) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Aug 7 22:18:05 MDT 2008'
##P3 t=678: AutoDetectBase::go() for 'Device creation from supplied parameters'
##P3 t=678: AutoDetectBase::createDevice() for Device 5e21a700
##P3 t=678: Device creation for type 0x5e21a700 requested
##P3 t=678: Device: probing port '/dev/ttyUSB3' for AT commands
##P5 t=678: Opened '/dev/ttyUSB3' as FD 7
##P5 t=678: Query instance 0xbf88d2a0 acquired MUTEX
##P1 t=678: Query: removing excess byte '.' 13
##P1 t=678: Query: removing excess byte '.' 10
##P1 t=678: Query: removing excess byte '+' 43
##P1 t=678: Query: removing excess byte 'Z' 90
##P1 t=678: Query: removing excess byte 'U' 85
##P1 t=678: Query: removing excess byte 'S' 83
##P1 t=678: Query: removing excess byte 'I' 73
##P1 t=678: Query: removing excess byte 'M' 77
##P1 t=678: Query: removing excess byte 'R' 82
##P1 t=678: Query: removing excess byte ':' 58
##P1 t=678: Query: removing excess byte '2' 50
##P1 t=678: Query: removing excess byte '.' 13
##P1 t=678: Query: removing excess byte '.' 10
##P4 t=678: Query sends the following mesage: 'AT'
AT\r\r\n
OK\r\n
##P4 t=678: answer 1:'AT'
##P4 t=678: answer 2:'OK'
##P5 t=678: checkQuery: removing echo up front
##P5 t=678: because known statement #0 was detected, removing obvious answer 'OK'
##P3 t=678: Got Query::OK from port
##P5 t=678: Query instance 0xbf88d2a0 abandoned MUTEX
##P3 t=678: SerialPort::~SerialPort()
##P3 t=678: SerialPort::closeDev() for FD 7
##P3 t=678: Device: probing port '/dev/ttyUSB3' successful
##P5 t=679: Opened '/dev/ttyUSB3' as FD 7
##P4 t=679: PPP: 1, AT: 1
##P5 t=679: Will use port '/dev/ttyUSB1' for PPP
##P5 t=679: Will use port '/dev/ttyUSB3' for AT
##P2 t=679: GOOD: 'Device created successfully'
##P2 t=679: Using existing hardware config, not written to disk
##P3 t=679: Everything done - device created
##P3 t=679: HelperList::testAndRun(void)
##P3 t=679: HelperList::createHelperList()
##P5 t=679: Runner::isSUID()
##P1 t=679: binary '/usr/sbin/pppd' is not SUID -> needs fixing
##P5 t=679: Runner::runCommand(3, list, 0)
##P5 t=679: Runner::isSUID()
##P3 t=679: INSIDE PARENT, uid=1000, pid=9360
##P5 t=679: Parent with pipes to not detached child
##P3 t=679: INSIDE CHILD, uid=1000, pid=9361
##P5 t=679: child read pipe loop end, flags: 4
##P5 t=679: child read pipe loop end, flags: 7
##P5 t=679: Runner::isSUID()
##P5 t=679: Runner::isSUID()
##P5 t=679: Runner::isSUID()
##P3 t=679: Binary icon_switch is missing and that's minor.
##P3 t=679: HelperList::needsFixing
##P3 t=679: HelperApp::add
##P3 t=679: HelperApp::add
##P3 t=679: HelperApp::add
##P3 t=679: HelperApp::add
Bin über jede hilfe wirklich DANKBAR!!!
Mfg TheRat