|
|
Autor |
Nachricht |
Gast
|
Verfasst am:
02.11.2007, 18:03 Aiptek 12000U Installation |
|
Hallo !
Ich habe ein Aiptek 12000U (USB) bekommen und möchte nun damit arbeiten.
Hab natürlich das Xorg modul geholt und angeschlossen.
Ohne Konfiguration funktioniert das Teil schon.
Aber : Beim Stift geht die Druckempfindlichkeit nicht.
So hab die Xorg schon mehrmals umgeschrieben, aber irgendwie hat das alles keine Auswirkung auf die Eingabe. Habt Ihr eine Idee?
lsusb|grep Aiptek
Bus 004 Device 003: ID 08ca:0010 Aiptek International, Inc. Tablet
/dev/input$ ls -l
lrwxrwxrwx 1 root root 6 2007-11-02 16:45 aiptektablet -> event4
Wurde von udev richtig gesymlinked
Relevante teile der xorg.conf
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "stylus" "AlwaysCore"
InputDevice "cursor" "AlwaysCore"
InputDevice "eraser" "AlwaysCore"
# InputDevice "pen" "SendCoreEvents"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
# -------------------------------------
# Aiptek drawing tablet
Section "InputDevice"
Identifier "stylus"
Driver "aiptek"
Option "Device" "/dev/input/aiptektablet"
Option "Type" "stylus"
Option "Mode" "absolute"
Option "PressCurve" "0,5,95,100"
Option "KeepShape" "on"
Option "zMin" "0"
Option "zMax" "512"
Option "USB" "on"
Option "Cursor" "stylus"
Option "debuglevel" "0"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "5999"
Option "BottomY" "4499"
Option "MaxX" "5999"
Option "MaxY" "4499"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "aiptek"
Option "Device" "/dev/input/aiptektablet"
Option "Type" "cursor"
Option "Mode" "absolute"
Option "PressCurve" "0,5,95,100"
Option "KeepShape" "on"
Option "zMin" "0"
Option "zMax" "512"
Option "USB" "on"
Option "Cursor" "puck"
Option "debuglevel" "0"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "5999"
Option "BottomY" "4499"
Option "MaxX" "5999"
Option "MaxY" "4499"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "aiptek"
Option "Device" "/dev/input/aiptektablet"
Option "Type" "eraser"
Option "Mode" "absolute"
Option "PressCurve" "0,5,95,100"
Option "KeepShape" "on"
Option "zMin" "0"
Option "zMax" "512"
Option "USB" "on"
Option "Cursor" "stylus"
Option "debuglevel" "0"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "5999"
Option "BottomY" "4499"
Option "MaxX" "5999"
Option "MaxY" "4499"
EndSection
Treiber Geladen (Kernel) habs mit lsmod überprüft.
Es funktioniert ja, aber es lässt sich nicht konfigurieren. Egal welche Werte ich ihm gebe.
Probieren tu ich es mit Gimp (da brauche ich es ja)
Hat jemand Ähnliche Erfahungen? Mir gehen langsam die Foren aus, in den en ich noch neue Infos finde.
Desktop: anderer
Version: 16.04
Hardware: Notebook
Architektur: 64Bit
|
|
|
|
|
1008050261051 Angriffe abgewehrt
Powered by Orion based on phpBB
© 2001, 2002 phpBB Group
CBACK Orion Style based on FI Theme
Alle Zeiten sind GMT + 2 Stunden
| |
|